Our watch straps features

Main characteristics and indicative sizes of our watch straps

———— ♦ ————

Original NATO watch straps (nylon)

Length excluding buckle * : ~27 cm
Thickness : ~1.2 mm
Buckle and loops assembly mode : thermowelding, in compliance with British MOD requirements
One piece irremovable stainless steel buckle and loops (no spring bar, no weakness point)

* Length of NATO straps is higher than on a traditional watch band, it is normal. We give explanations and advice on a dedicated page.

———— ♦ ————

Prestige NATO watch straps (nylon)

Length excluding buckle * : ~27 cm
Thickness : ~1.2 mm
Buckle and loops assembly mode : stitching
One piece irremovable stainless steel buckle and loops (no spring bar, no weakness point)

* Length of NATO straps is higher than on a traditional watch band, it is normal. We give explanations and advice on a dedicated page.

———— ♦ ————

SELECT-HEURE NATO watch straps (nylon)

Length excluding buckle * : ~27.5 cm
Thickness : ~1.2 mm (~1.4 mm for the Allure collection)
Buckle and loops assembly mode : stitching
Stainless steel buckle with "SH" signature
Stainless steel loops

* Length of NATO straps is higher than on a traditional watch band, it is normal. We give explanations and advice on a dedicated page.

———— ♦ ————

PHOENIX NATO watch straps

Length excluding buckle * : ~28 cm
Thickness : ~1 mm
Buckle and loops assembly mode : thermowelding, in compliance with British MOD requirements
One piece "Phoenix" engraved irremovable stainless steel buckle (no spring bar, no weakness point)

Vigilance point on PHOENIX straps : Their holes tend to fray. It is easy to control with regular checks and few fire burnings. But you must accept this constraint, which does not happen with our other collections...

* Length of NATO straps is higher than on a traditional watch band, it is normal. We give explanations and advice on a dedicated page.

———— ♦ ————

XL NATO watch straps (nylon)

Length excluding buckle * : ~30.5 cm
Thickness : ~1.2 mm
Buckle and loops assembly mode : stitching
One piece irremovable stainless steel buckle and loops (no spring bar, no weakness point)

* High length either to put on a diving suit (or other), or for big wrists to keep the NATO style with the folded extra nylon part in the two loops. We give explanations and advice on a dedicated page.

———— ♦ ————

US Military watch straps (nylon)

Length excluding buckle * : ~25 cm (2 cm less than NATO straps)
Thickness : ~1.2 mm
Buckle and loop assembly mode : stitching
One piece irremovable stainless steel buckle (no spring bar, no weakness point)

* Length of US Military straps is close to traditional watch bands. For small wrists, the extra part of nylon can be folded in the nylon loop.

———— ♦ ————

SELECT-HEURE ELIT watch straps (nylon and leather)

SELECT-HEURE exclusive design
Length excluding buckle * : ~25 cm (2 cm less than NATO straps)
Thickness : ~1.2 mm
Buckle and loops assembly mode : stitching
High-end brushed stainless steel buckle with plain pin
One fixed loop, one mobile loop

* Length of Serge nylon straps is close to traditional watch bands. For small wrists, the extra part of nylon can be folded in the stainless steel loops.

———— ♦ ————

Perlon watch straps (nylon)

Length excluding buckle * : ~26 cm
Important : easy length adjustment through its specific buckle (the unused length is folded and goes below the strap)
Thickness : ~1.2 mm
Choice of buckles including high-end stainless steel models

* Strap length adjustment through its buckle enables a usage on every wrist size.

———— ♦ ————

ZULU and NATO ZULU watch straps (nylon)

Length excluding buckle * : ~27 cm
Thickness : ~1.5 mm (please check the compatibility of your watch)
Buckle and loops assembly mode : stitching
One piece irremovable buckle and loops (no spring bar, no weakness point)

* Length is higher than on a traditional watch band, it is normal. We give explanations and advice on a dedicated page.

———— ♦ ————

2 pieces NATO and SELECT-HEURE US Military watch straps (nylon)

Buckle side length : ~7.5 cm excluding buckle
Hole side length : ~12.5 cm
Total length excluding buckle : ~20 cm
Thickness : ~1.2 mm
Traditional stainless steel buckle fixed by a spring bar. This fixation mode enables the installation of another buckle

———— ♦ ————

2 pieces ZULU watch straps (nylon)

Buckle side length : ~8 cm excluding buckle
Hole side length : ~14 cm
Total length excluding buckle : ~22 cm
Thickness : ~1.5 mm
One piece irremovable stainless steel buckle and loops (no spring bar, no weakness point)

———— ♦ ————

SELECT-HEURE Italian and Vintage leather NATO straps

Length excluding buckle * : ~27.5 cm
Thickness : ~1.2 mm (for a compatibility on every watch)
Buckle and loops assembly mode : stitching
No lining (down side is raw)
One piece irremovable stainless steel buckle and loops (no spring bar, no weakness point)

* Length of NATO straps is higher than on a traditional watch band, it is normal. We give explanations and advice on a dedicated page.

———— ♦ ————

Aviator lamb leather NATO straps

Length excluding buckle * : ~27.5 cm
Thickness : ~1.5 mm (please check the compatibility of your watch)
Buckle and loops assembly mode : stitching
Lamb lining (top and down sides have same lamb skin)
Traditional stainless steel buckle fixed by a spring bar. This fixation mode enables the installation of another buckle
Thin and chic stainless steel loops

* Length of NATO straps is higher than on a traditional watch band, it is normal. We give explanations and advice on a dedicated page.

———— ♦ ————

SELECT-HEURE leather NATO ZULU straps

Length excluding buckle * : ~27 cm
Thickness : ~1.7 mm (please check that your watch allows such a thickness before ordering)
Buckle and loops assembly mode : stitching
One piece irremovable buckle and loops (no spring bar, no weakness point)

* Length of NATO ZULU straps is higher than on a traditional watch band, it is normal. We give explanations and advice on a dedicated page.

———— ♦ ————